Products/Anchoring
Anchoring System
High-performance injection anchor adhesives for reliable rebar planting in concrete, masonry, and natural stone. Seismic-qualified, fast-curing formulas.
Epoxy Anchor Adhesive 360
Bond strength ≥ 10 MPa (M20 in C25 concrete)
390ml Anchor Adhesive — Fast-Cure
Fast cure — gel time 5 min at 25°C
Bulk Anchor Adhesive B20
Cost-effective for large projects
Chemical Anchor Adhesive 420ml C420
Dual cartridge system — pre-measured ratio
585ml Epoxy Anchor Adhesive — Heavy-Duty E585
Heavy-duty for large rebar Ø16–40mm
Epoxy Anchor Adhesive 600ml E600
Bond strength ≥ 12 MPa in C30 concrete
650ml Chemical Anchor Adhesive
SGS certified quality
Hybrid Anchor Mortar HM
No hole cleaning required
Concrete Anchor Epoxy CE
Works in damp and wet concrete
Injectable Adhesive IA
Flowable formula fills annular gap completely
About XINCHOR Anchoring System
Injectable epoxy and vinyl ester anchor adhesives for rebar planting, anchor bolt installation, and post-installed connections. Approved for seismic zones. All products are manufactured in our ISO 9001 certified facility in Hangzhou, China, backed by 26 national patents and 20+ years of production experience. We supply factory direct to contractors and distributors in 30+ countries.
Frequently Asked Questions
What is the difference between epoxy anchors and mechanical anchors?
Epoxy anchors bond rebar or bolts to concrete via chemical adhesion (bond strength 10–13 MPa), while mechanical anchors use expansion and friction. Epoxy anchors deliver higher load capacity, work in cracked concrete, and allow closer edge distances — making them the preferred choice for seismic retrofit and structural connections.
What rebar sizes can XINCHOR epoxy anchors support?
Our epoxy anchor range covers rebar from Ø8 mm to Ø40 mm. The 360ml cartridge handles Ø8–Ø32 mm, the 585ml heavy-duty cartridge handles Ø16–Ø40 mm, and the 650ml vinyl ester fast-set handles Ø10–Ø32 mm with full load in 30 minutes.
Are your chemical anchors seismic-qualified?
Yes. Our vinyl ester formulas (XQ-ZJ-V390 and XQ-ZJ-VF650) carry seismic C1 qualification for cracked concrete. The fast gel time (4–5 minutes) and high bond strength (≥12 MPa) make them suitable for earthquake zone applications per ACI 318 Appendix D requirements.
What is the cure time for epoxy anchor adhesive?
Our epoxy anchor XQ-ZJ-360 reaches full load in 24 hours at 25°C. At 10°C it takes about 48 hours. For urgent projects, our vinyl ester formula XQ-ZJ-V390 reaches full load in just 45 minutes at 25°C — ideal for time-critical installations.
Related Technical Guides
Ready to Strengthen Your Next Project?
Get expert guidance and competitive quotes from our engineering team.